Loading

Swift IP Gateway A200

The new generation IP Gateway is equipped with a display showing all essential information about network connections. 

The gateway supports all MOTOTRBO radios and can provide interface to analog or digital radios.

Each Swift Agent IP gateway is configured to be connected to a control radio and capable of monitoring a single radio channel. Typical use cases vary from analog-to-digital migration to remote control room solutions. A typical migration process may take months or even years to complete so the Swift Agent IP gateways can link both parts of your network so that communications will be seamless through the migration period.

The IP gateway makes it possible to manage and monitor a remote radio network installed in a geographically isolated location (where accessibility is difficult).  It is possible for control radios to be installed hundreds of kilometres away from the control room, but such high latency (up to 300 msec delay) can be easily handled by the IP gateway. IP gateways are sold in two different form factors: A200 (compact version) and A001 (rack mounted unit).

Next
Prev

Remote Control Room

This is the right solution if you want to connect one or more remote control (donor) radios located far from the control room.

  • Geographically distributed
  • Remote control radios
  • Latency up to 300 ms
  • Analog and digital radios


Smooth Migration

Most analog radios can be connected to your MOTOTRBO system via IP Gateways (Agents) for smoother migration from analog to digital radios.

  • Analog control radios
  • LAN connection to server
  • Cross-patching
  • Seamless integration


Compact and Reliable

Tried and tested by Neocom to ensure all products are fully capable of achieving its full performance.

  • Unattended operation
  • Wired or wireless
  • Connection status
  • Challenging environments


This is a product designed to work with control or donor radios. There are numerous scenarios where Swift IP Gateways can be implemented. 
 

Scenario 1: Remote Control Radio

You may have a local system and a remote control radio that you want to monitor. This remote radio can be hundreds of kilometres away from the dispatcher seat. Unfortunately, it is not possible to connect the remote radio to the server with a USB cable that long. The IP gateway makes it possible to use a LAN connection rather than USB. You can just put it nearby your mobile radio and connect it to your IP network. Each IP Gateway is able to work with one channel (voice or data). 
 

Scenario 2: High Latency Environment

The IP gateway can work with latencies up to 300 ms, which does compare to 60/90 ms recommended by the MOTOTRBO System Planner. If part of your MOTOTRBO radio network is located in such a challenging environment, it can be connected to your server using IP Gateways, one per channel.

Scenario 3: Radio System on Control Radios

If your MOTOTRBO radio network is based on control radios, you may run into a few problems. First of all, you may not have enough USB ports in your PC to plug all of them into it. On the other hand, a USB cable per se cannot be considered as a very reliable means of connection. This is why the more control stations the more potential points of failure there are in your system. Finally, donor radios for voice channels must be connected to sound cards, each radio to the respective sound card. It is becoming increasingly difficult if you have to plug three or more control stations. Swift IP Gateways do not require USB ports, nor do they need sound cards. The LAN connection is by far more reliable and resilient.

Scenario 4: Analog-to-Digital Migration

Last, but not least. If you decided to migrate from analog to digital, it may take a few years to purchase and install MOTOTRBO infrastructure and effectively replace all the components of the legacy radio network. This means that you can have both analog and digital radio subscribers on your network for quite awhile. At the same time, you want both types of radio users to communicate with each other during the migration period. In this case you can use our gateways to interface your MOTOTRBO radio network to the legacy system. You will require one analog control radio per each analog channel you want to monitor (note that your analog donor radio must be compatible with Swift IP Gateway). The essence of the solution is that you can use cross patch to automatically link digital and analog channels to provide seamless communication across different radio networks.